Yamatake EST240Z Specifications download pdf

Specification

1. Introduction

The FLC is a compact controller designed with an eye towards

installation in a board. The FLC has the following functions and

features:

Control

The FLC has functions equivalent to those of a full-scale pro-

cess controller.

It can be used for executing both PID control and sequence

control and it is provided with various functions.

Program creation and maintenance can be performed with

the integrated engineering environment RTC. Debugging can

be performed easily by conducting virtual simulation on a

personal computer.

Programs can be displayed with charts using the logic block

and function block for easy observation.

Created programs can be displayed in the form of drawings.

Installation

Compact type controller that can be installed in a small-size

standard board (400 400).

Mountable on an existing self-standing board or wall-hang

board.

Built-in external wiring terminal board, cable connecting the

input/output card with the terminal board, power supply wir-

ing for field device signal and short protection circuit.

As it can be connected directly with the field wiring, installa-

tion is completed by just installing FLC and connecting the

power supply with the field wiring.

368 input/output points at the maximum (approximately 256

points with a usual combination).

Various types can be combined in accordance with the appli-

cation.

Environment-endurable design that allows operation in an en-

capsulated board.

System Compatibility

Redundant controlling Ethernet is equipped for standard speci-

fications.

A programmable indicator [EST555Z] can be connected to

perform graphic monitoring and collecting and storing data.

This system can be used as a digital recorder.

Developable to a system such as the cooperative automa-

tion system Harmonas by connecting a controlling Ethernet

cable. The FLC can be introduced for each local board indi-

vidually, making stepwise networking and systemization pos-

sible.

Note: Refer to CP-SS-1800 for the specification sheet of the programmable indicator

“EST555Z,” and to CP-SS-1700 for that of the “EST240Z.”

Harmonas-FLeX

Distributed controller (FLC)

Figure 1. Example of Installation in a Board

Figure 2. EST555Z/EST240Z

PlantWalker-HV

Harmonas-FLeX

Harmonas

Figure 3. ISystem Architecture

No.SS2-FLC100-0010P

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Specification

1Specification1. IntroductionThe FLC is a compact controller designed with an eye towardsinstallation in a board. The FLC has the following functions

Page 2 - 2. Functional Overview

1010. Outer Dimensional Drawing136(127)28032531013.523 981392802598Mounting surfaceR4.5R4.5*: The figure in the brackets is for models without the fie

Page 3 - (Note 3)

11(This page intentionally left brank.)

Page 4 - Table 6. List of Models

12Specifications are subject to change without notice.New Stage Yokohama Building 1-1-32, Shin-urashima-cho, Kanagawa-ku,Yokohama 221-0031, JAPANTel:

Page 5

22. Functional OverviewThe FLC consists of a main unit and three expansion units atthe maximum, and each unit has 6 I/O slots to mount I/O cards.When

Page 6 - 3. Control Functions

3Installation environment conditionsInstallation environment conditions for a single installation areshown in the following table. For a single insta

Page 7 - 4. Alarm System Functions

4Table 5-2. Input and Output Specifications (Continued)SpecificationsNumber of points 16 points/cardOutput circuit Open collectorCommon 16 points comm

Page 8 - Point Type PU value

5Functions of each partNames of each part are shown in Figure 4.Functions of the display unit are as follows:·POWER : Lights up when the power supply

Page 9

63. Control FunctionsControl functions are classified into the following control points:Regulatory PV Point (RegPV)Standard I/O processing functions,

Page 10 - Mounting surface

7Function Block Point (FB)Function block point consists of 91 types of function blocks (seeTable 11). Up to 2048 function blocks are available per poi

Page 11

8Alarm PriorityAlarm priority can be configured for individual alarm types foreach point. Selectable alarm priorities can be divided into thefollowing

Page 12 - Tel: 81-45-461-8823

9Memory Unit (MU Value)Memory unit value is a unit value indication that helps user in usingmemory of FLC, this determines the total size of CL progra